Copyright © 2000 - 2006 by A905, 2006. All rights Reserved.
A905 and Creatinglight are a registrated Trademarks.
Web and contents are updated by PLANET HOLLYWOOD AB and Pontus Plaahn,
Stockholm, Sweden. AUGUST 2006
HOME
THE STORY
PICTURES
ARCHIVE
ABOUT US



HMS
(C)

LYSTECH LYSTRÅD

PATENTED SYSTEM FOR FOR GUIDING AND EMERGENCY LIGHTING

-FOR INCREASED SAFETY DURING EVACUATION IN LOW LIGHT CONDITIONS SUCH AS POWER OUTAGE, FIRES ETC. SUITABLE FOR HOSPITALS, INDUSTRIES, SHOPPING CENTRES AND HOTELS

DESCRIPTION

Activley flourescent lighting cord for marking evacuation routes and emergency exits. The cord can be easily formed into different shapes for marking evacuation directions or outlining exits. The cord shines brightly for a long time after activation without a decrease in brightness. Activation of the cord is done through an electrical system running on battery back up and can be triggered by, for example; Power outage, fire and smoke alarms. Other means of activation can be made upon customer requests.

INSTALLATION

The lighting cord can be embedded into floors, walls and handrails. The cord can be embedded into any surface material in a 5mm track that is sealed with a light spreading compound during the installation. Other means of installation are also available upon customer requests. Installation shall be carried out by a certificated craftsman, please contact LYSTECH for further information. Regular inspections must be performed to ensure proper functionality and safety. The cord can be reused or sent back to LYSTECH for recycling.

COULOUR

Blue/Green, Red, Yellow/White

STANDARD COMPLIANT

The lighting cord complies with SITAC 0164/01. Manufacuring is controlled by NEMKO. The Lighting cord is CE-compliant. Complies to IMO A. 752(18) §8 when doubled up. IP67 compliant.

REFERENCES

SL, Hornstull Underground Station, Technical Support Area, Stockholm

The New Opera, Construction Area, Oslo / www.creatinglight.com  under uppbyggnad

Borre havarivernskole FKF Tønsberg, Norge / www.creatinglight.com under uppbyggnad


TECHNICAL DATA
Supply Voltage
V
6V-400V AC/DC
Working Voltage
V
110/400Hz
Current Cons.
V
0,05A per 100m
Insulation
V
4000V Complies with IEC 335-1
Combustion Point
850C° Complies with IEC 335-1
Storage Temp
-40C° to 80C°
Optical Wavelenght
nM
505nM at 400Hz
Diameter
mm
3,2mm Ø, 5,0mm Ø
Capacitance
nF
5,3-7,5nF/m
Operating Time
h
min. 12 000h
Illuminance (immed.) *1
Lux
min 66
Illuminance *2
med
15,4 at 100cm distance
TECH INFO - LYSTRÅD
TECH INFO

*1 SP Report MtoF412313
*2 SP Report MtoF412313

PARTNERS
PARTNERS
PARTNERS
PARTNERS
PARTNERS
PARTNERS